OMEC Brush / Buff / Mop Tapered Spindle Dental Lathe Chuck - Black - Left Hand or Right Hand - 1pc

I or S (Single Stripe) Symbol = Suits Left Hand side  

D (Double Stripe) Symbol = Suits Right Hand side

These chucks are for placement on most standard dental lathe shafts with 3/8 inch dia (Approx 9.2mm) / standard tapered shaft.

• External Diameter Widest Part Fitting End: 18mm (DOES NOT FIT Wassermann, Omec or Kavo Lathes / polishing units with a small diameter chuck pulling device like Wassermann or Omec Polishing Units)

• Internal Diameter Hole Opening 9.2mm

• Internal Hole Depth 35mm

• Overall Length Approx: 93mm

*** Please check the diameter of your lathe shaft is approx 9.2mm so that you are sure these will fit your machine.

*** DOES NOT fit Kavo brand machines.

*** DOES NOT fit Industrial Size shafts bigger than 9.2mm Diameter.