Kulzer Signum Metal Bond II - 4ml - 66033916 - Light Cure Opaquer MUST BE CURED USING HIGH POWERED LIGHT BOX LIKE KULZER HILITE

Brand: Kulzer
Product Code: K-SMB2

Description

Signum Metal Bond – Metal to Acrylic Bonding Agent

PLEASE MAKE SURE YOU HAVE A SUITABLE HIGH POWERED CURING LAMP OR LIGHT BOX TO CURE THESE MATERIALS - These material will not cure correctly in a small standard 36w light box. Needs higher powered curing box or wand.

Compatible Curing Light Lamps:

HiLite Power / Power 3D (Kulzer)
UniXS / Heraflash (Kulzer)
SolidLite EX (Shofu)
Spectramat (Ivoclar)

Metal-resin bonding agent for crown, bridge and partial denture technique.

Wide areas of application (acrylic dentures/composite)
Due to cold adhesion bonding it is suitable for restorations with a chair side application
Up to 300% better adhesion of composite and acrylic material to precious, non-precious metal alloys and titanium
The bonding agent is extremely resilient and remains strong for a long period of time.

Metal Bond II – Light Cured Opaquer

For quick masking of metal structures before adding acrylic or composite (Light cured)
Bonding of composite to all metal framework surfaces ‐ Use Metal Bond I & II

Instructions: Shake well and polymerize for 90 sec. with high powered lightbox like Heraflash, HiLite power or UniXS.
For intraoral use: Polymerize Signum metal bond II for 40 seconds with a dental polymerization lamp / wand (e.g. Translux®). For an optimum bond apply the relevant opaquer without undue delay and without contaminating the surface by touching it. Then apply the composite or acrylic.

Kulzer Signum Metal Bond II - 4ml - 66033916 - Light Cure Opaquer MUST BE CURED USING HIGH POWERED LIGHT BOX LIKE KULZER HILITE

Brand: Kulzer
Product Code: K-SMB2

Description

Signum Metal Bond – Metal to Acrylic Bonding Agent

Compatible Curing Light Lamps:

HiLite Power / Power 3D (Kulzer)
UniXS / Heraflash (Kulzer)
SolidLite EX (Shofu)
Spectramat (Ivoclar)

Metal-resin bonding agent for crown, bridge and partial denture technique.

Wide areas of application (acrylic dentures/composite)
Due to cold adhesion bonding it is suitable for restorations with a chair side application
Up to 300% better adhesion of composite and acrylic material to precious, non-precious metal alloys and titanium
The bonding agent is extremely resilient and remains strong for a long period of time.

Metal Bond II – Light Cured Opaquer

For quick masking of metal structures before adding acrylic or composite (Light cured)
Bonding of composite to all metal framework surfaces ‐ Use Metal Bond I & II

Instructions: Shake well and polymerize for 90 sec. with high powered lightbox like Heraflash, HiLite power or UniXS.
For intraoral use: Polymerize Signum metal bond II for 40 seconds with a dental polymerization lamp / wand (e.g. Translux®). For an optimum bond apply the relevant opaquer without undue delay and without contaminating the surface by touching it. Then apply the composite or acrylic.