SPECIAL ORDER ITEM - 2-3 WEEKS DELIVERY - Please be advised. This product is not always kept in stock and may require ordering in. Please contact our office for further information. 

MATERIAL AND COMPONENTS MUST BE CURED USING HIGH POWERED LIGHT BOX LIKE KULZER HILITE POWER

**PLEASE MAKE SURE YOU HAVE A SUITABLE HIGH POWERED CURING LAMP OR LIGHT BOX TO CURE THESE MATERIALS - These material will not cure correctly in a small standard 36w light box. Needs higher powered curing box or wand. 

Compatible Curing Light Lamps:

• HiLite Power / Power 3D (Kulzer)
• UniXS / Heraflash (Kulzer)
• SolidLite EX (Shofu)
• Spectramat (Ivoclar)

Kulzer Pala cre-active Gum Characterisation Light Cured System

Downloads

Step by Step Guidelines by Kulzer Australia PDF Download

Kulzer Instructions

Kulzer Pala Cre-Active Brochure Guidelines

Light-curing colourfluid system for customised characterisation of dentures These light-curing colourfluids in combination

with the Signum connector for heat-curing and cold-curing resins are particularly suitable for customised characterisation of full and partial dentures and implant-retained dentures.

The Pala cre-active colourfluids can be mixed into the Pala cre-active gingiva material as colour intensifying agents.

Thanks to the variety of consistencies and colour shades, highly customised gingival regions can be created that feature smooth or rough surfaces with transparent, light red or dark red effects.

Advantages

■ Easy, quick application

■ Gingival customisation easy and fast application

■ Various consistencies available (paste/liquid)

■ Easily trimmed and polished

Indication

■ Customisation of full and partial dentures

(based on methylmethacrylate)

■ Customisation of implant dentures

■ Preparation of gum masks

Processing procedure

■ Single-component material

■ Surface of the prosthesis is roughened with a coarse diamond

■ Apply Signum connector

■ Pala cre-active can be applied directly to the cured prosthetic resin with a brush or modelling instrument

■ Cures in light polymerisation unit (Uni XS, Heraflash, HiLite power, HiLite power 3D)

Kit Contains:
6 x 3g Colourfluids Colours; 6 x 3g Gingiva Shades; 1 x PALA cre‐active Shade Guide; 1 x Brush; 20 x Cannulae (Metal) 1.2mm; 5 x Cannulae (Plastic) 1.87mm
 

Please be advised. This product is not always kept in stock and may require ordering in. Please contact our office for further information.