- Products
- Thermoforming Material
- Splint / Aligner / Retainer Material (Hard)
- 120mm Round Splint / Aligner Materials (Hard)
- Keystone Proform USA Splint Hard Material 1.0mm or 1.5mm - Clear (Blue Protection Sheet) - Hard - ROUND 120mm - Pack of 25
Keystone Proform USA Splint Hard Material 1.0mm or 1.5mm - Clear (Blue Protection Sheet) - Hard - ROUND 120mm - Pack of 25
- Brand: Proform
- Product Code: SMR120-*.*
** 2mm HARD SQUARE SPLINT - LIMITED STOCK LEFT - NO LONGER STOCKED **
Keystone Proform USA Splint Hard Material 1.0mm or 1.5mm - Hard - ROUND 120mm - Pack of 25
Clear (Blue Protection Sheet)
For hard splints, thin splints, surgical trays, orthodontic retainers, clear aligners, and bleaching trays.
MSDS MATERIAL SAFETY DATA SHEET
Clear stiff material that acrylic sticks to. Available in 127mm Square and 120mm Round.
This stiff clear Splint Material is ideal for hard splints, thin splints, surgical trays, orthodontic retainers and bleaching trays. The material sticks to acrylics for various dental appliances. The versatile splint material will surely be used in any lab or office.
Chemical characteristics: PETG: copolyester
Features:
Clear Material with removable Blue Plastic protection sheet
Options available: 1mm (.040"), 1.5mm(.060") and 2mm (.080")
Storage Tip: Prevent Bubbles In Material Once Open
All Splint material is susceptible to absorb moisture from the air that will create bubbles in the material when heated.
Material must be stored in air tight container or ziplok sealed bag in a cool dry place with gel pack. Away from water, steam and humidity.
To make use off effected material, place the material in an oven at 70 degrees maximum for 1 hour to draw moisture out of material.
INSTRUCTIONS REMOVE PROTECTIVE FILM PRIOR TO USE
Thinner materials do not require as much heat as thicker ones. The 020,030 & 040 thicknesses should be heated until approximately ¼” of droop occurs. Thicker materials should heat until approximately ½” of droop occurs. After heating, vacuum form over the model. Thinner materials can be trimmed using a scissor. Thicker materials can be trimmed using a wheel saw.
Storage: This material is hygroscopic (it absorbs moisture from the air). Moisture in the material will result in the formation of bubbles during the heating process. Always store the material in the packaging with dry gel pack provided. Store the material in a cool, dry location.
Note: Material is not made with natural rubber latex, does not contain DEHP or other Phthalates, or Bisphenol A(BPA) and is gluten free.
Keystone Proform USA Splint Hard Material 1.0mm or 1.5mm - Clear (Blue Protection Sheet) - Hard - ROUND 120mm - Pack of 25
- Brand: Proform
- Product Code: SMR120-*.*
Available Options
** 2mm HARD SQUARE SPLINT - LIMITED STOCK LEFT - NO LONGER STOCKED **
Keystone Proform USA Splint Hard Material 1.0mm or 1.5mm - Hard - ROUND 120mm - Pack of 25
Clear (Blue Protection Sheet)
For hard splints, thin splints, surgical trays, orthodontic retainers, clear aligners, and bleaching trays.
MSDS MATERIAL SAFETY DATA SHEET
Clear stiff material that acrylic sticks to. Available in 127mm Square and 120mm Round.
This stiff clear Splint Material is ideal for hard splints, thin splints, surgical trays, orthodontic retainers and bleaching trays. The material sticks to acrylics for various dental appliances. The versatile splint material will surely be used in any lab or office.
Chemical characteristics: PETG: copolyester
Features:
Clear Material with removable Blue Plastic protection sheet
Options available: 1mm (.040"), 1.5mm(.060") and 2mm (.080")
Storage Tip: Prevent Bubbles In Material Once Open
All Splint material is susceptible to absorb moisture from the air that will create bubbles in the material when heated.
Material must be stored in air tight container or ziplok sealed bag in a cool dry place with gel pack. Away from water, steam and humidity.
To make use off effected material, place the material in an oven at 70 degrees maximum for 1 hour to draw moisture out of material.
INSTRUCTIONS REMOVE PROTECTIVE FILM PRIOR TO USE
Thinner materials do not require as much heat as thicker ones. The 020,030 & 040 thicknesses should be heated until approximately ¼” of droop occurs. Thicker materials should heat until approximately ½” of droop occurs. After heating, vacuum form over the model. Thinner materials can be trimmed using a scissor. Thicker materials can be trimmed using a wheel saw.
Storage: This material is hygroscopic (it absorbs moisture from the air). Moisture in the material will result in the formation of bubbles during the heating process. Always store the material in the packaging with dry gel pack provided. Store the material in a cool, dry location.
Note: Material is not made with natural rubber latex, does not contain DEHP or other Phthalates, or Bisphenol A(BPA) and is gluten free.
Related Products
Briteguard Laminate / Bleaching Tray Material Soft 1.5mm - Pack Of 10
Multibuy Offers: BUY 5 Packs (50 sheets) - SAME TYPE -SAVE 10% Briteguard Clear ..
Keystone Proform NITEGUARD 3mm - SQUARE - Dual Layer Laminate (Soft/Soft) - REF 9602550 - 12pc
Keystone Pro-Form Niteguards Proform NITEGUARD 3mm - SQUARE - Dual Layer Laminate (Soft/Soft) ..
Hammacher Germany Splint / Mouthguard Scissors Curved HSB630-10 - 1pc
These top selling splint/foil and mouthguard material scissors provide superior easy cutting..
Aldente RSB Dunaform PLUS Pressure Former 581-003-006 - V2 Upgraded
NEW Digital Model - 10 Program Memory Aldente DUNAFORM PLUS Pressure Former V2 RRP $..
Aldente Combiloc Plus Dual Layer (Hard / Soft) Splint Material - 3.0mm - Round 120mm Clear - Pack 10 (581-012-095)
Aldente Combiloc Plus Dual Layer (Hard / Soft) Splint Material - 3.0mm - 120mm Round Used for all k..
"Zeta Med" Snoring Device Component With Wings - Type C - Titra Table Appliance - 1 Unit (zMDSA)
"Zeta Med" Snoring Device Component With Wings – Type C - Titra Table Appliance - 1 ..
Aldente Combiloc Plus Dual Layer (Hard / Soft) Splint Material - 2.0mm - Round 125mm - Clear - Pack 10 (581-012-093-125RD)
Aldente Combiloc Plus Dual Layer (Hard / Soft) Splint Material 2mm Combiloc Plus - 125mm ROUND..
Aldente Combiloc Plus Dual Layer (Hard / Soft) Splint Material - 3.0mm - Round 125mm - Clear - Pack 10 (581-012-095-125RD)
COMBILOC PLUS 125mm Round - 3.0mm Thick (581-012-095-125RD) Application: Comfortable s..
Gibling Laminate / Bleaching Tray Material Soft 1.5mm - Pack Of 10
Multibuy Offers: BUY 5 Packs (50 sheets) - SAME TYPE - SAVE 10% Clear Soft EVA that is suitable..
Aldente Folidur N Hard Splint / Aligner Material - 1.0mm (.040”) - 120mm Round - Clear - Pack 20 (581-012-300)
Aldente Folidur N Splint / Aligner Material, 1.0mm (.040”), 120mm Round – Clear ..
Aldente Combiloc Plus Dual Layer (Hard / Soft) Splint Material - 5.0mm Round 120mm Clear - Pack 10 (581-012-180)
Aldente Combiloc Plus Dual Layer (Hard / Soft) Splint Material 5.0mm Combiloc Plus - 120mm ROU..
Aldente Combiloc Plus Dual Layer (Hard / Soft) Splint Material - 4.0mm - Round 120mm - Clear - Pack 10 (581-012-177)
Aldente Combiloc Plus Dual Layer (Hard / Soft) Splint Material 4mm Combiloc Plus - 120mm ROUND..
Aldente Combiloc Plus Dual Layer (Hard / Soft) Splint Material - 2.0mm - Round 120mm - Clear - Pack 10 (581-012-093)
Aldente Combiloc Plus Dual Layer Splint Material 2mm Combiloc Plus - 120mm ROUND Used for all..
Aldente Folidur N Hard Splint / Aligner Material - 0.6mm (0.020”) -120mm Round - Clear - Pack 20 (581-012-045)
Aldente Folidur N Splint / Aligner Material, 1.0mm (.040”), 120mm Round – Clear - Pack 2..
Aldente Folidur N Hard Splint / Aligner Material - 0.8mm (0.030”) -120mm Round - Clear - Pack 20 (581-012-049)
Aldente Folidur N Hard Splint / Aligner Material - 0.8mm (0.030”) -120mm Round – Clear -..
Aldente Folidur N Hard Splint / Aligner Material - 2.0mm (.080”) - 120mm Round - Clear - Pack 10 (581-012-302)
Aldente Folidur N Hard Splint / Aligner Material - 2.0mm (.080”) - 120mm Round - Cle..
Aldente Combiloc Plus Dual Layer (Hard/Soft) Splint Material - 3.0mm - SQUARE - Clear - Pack 10
COMBILOC PLUS SQUARE - 3.0mm Thick Application: Comfortable stabilization and occlusal spli..
Aldente Folidur N Hard Splint / Aligner Material - 1.0mm (0.040”) - 125mm Round - Clear - 1 x Pack 20 (581-012-300-125RD)
Aldente Folidur N Hard Splint / Aligner Material - 1.0mm (0.040”) - 125mm ..
Aldente Folidur N Hard Splint / Aligner Material - 2.0mm (0.080”) - 125mm Round - Clear - 1 x Pack 10 (581-012-302-125RD)
Aldente Folidur N Hard Splint / Aligner Material - 2.0mm (0.080”) - 125mm Round – Clear ..
Aldente Folidur N Hard Splint / Aligner Material - 1.5mm (0.060”) - 125mm Round - Clear - 1 x Pack 10 (581-012-301-125RD)
Aldente Folidur N Hard Splint / Aligner Material - 1.5mm (0.060”) - 125mm Round – C..
Aldente Folidur N Hard Splint / Aligner Material - 1.5mm (0.060”) - 120mm Round - Clear - Pack 10 (581-012-301/308)
Aldente Folidur N Hard Splint / Aligner Material - 1.5mm (.060”) - 120mm Round – Clear -..
Keystone Proform NITEGUARD 3mm - 120MM ROUND - Dual Layer Laminate (Soft/Soft) - REF 9602550R2 - 12pc
Proform NITEGUARD 3mm - 120mm ROUND - Dual Layer Laminate (Soft/Soft) – REF 9602550R2 &nd..
Aldente Folidur N Hard Splint / Aligner Material - 0.6mm (0.020”) -125mm Round - Clear - Pack 20 (581-012-045-125RD)
Aldente Folidur N Hard Splint / Aligner Material - 0.6mm (0.020”) -125mm Round - Clear - Pack ..
Aldente Folidur N Hard Splint / Aligner Material - 0.8mm (0.030”) -125mm Round - Clear - Pack 20 (581-012-049-125RD)
Aldente Folidur N Hard Splint / Aligner Material - 0.8mm (0.030”) - 125mm Round - Clear - Pack..
Aldente Combiloc Plus Dual Layer (Hard / Soft) Splint Material - 5.0mm Round 125mm Clear - Pack 10 (581-012-180-125RD)
Aldente Combiloc Plus Dual Layer (Hard / Soft) Splint Material 5.0mm Combiloc Plus - 125mm ROU..
Aldente Combiloc Plus Dual Layer (Hard / Soft) Splint Material - 4.0mm - Round 125mm - Clear - Pack 10 (581-012-177-125RD)
Aldente Combiloc Plus Dual Layer (Hard / Soft) Splint Material 4mm Combiloc Plus - 125mm ROUND..
Aldente Folidur N Hard Splint / Aligner Material - 2.0mm (0.080”) - 125mm Round - Clear - 1 x Pack 10 (581-012-302-125RD) *** OUT OF DATE STOCK - FOR TRAINING PURPOSES ***
OUT OF DATE STOCK - EX 07/2024 - FOR TRAINING PURPOSES Aldente Folidur N Hard Splint / Aligner Ma..
Aldente Folidur N Hard Splint / Aligner Material - 2.0mm (0.080”) - 125mm Round - Clear - 1 x Pack 10 (581-012-302-125RD) - OPENED PACK CLEARANCE
Aldente Folidur N Hard Splint / Aligner Material - 2.0mm (0.080”) - 125mm Round - Clear - 1 x ..