Ainsworth Brush / Buff / Mop Tapered Spindle Dental Lathe Chuck - Left Hand or Right Hand - 1pc

These chucks are for placement on most standard dental lathe shafts with 3/8 inch dia (Approx 9.2mm) / standard tapered shaft.

I or S Symbol = Left Hand

D Symbol = Right Hand

• External Diameter Widest Part Fitting End: 19mm (DOES NOT FIT Wassermann, Omec or Kavo Lathes polishing units with small diameter chuck pulling removal device)
• Internal Diameter Hole Opening 9.5mm
• Overall Length Approx: 85mm

*** Please check the diameter of your lathe shaft is approx 9.5mm so that you are sure these will fit your machine.

*** DOES NOT fit Kavo brand machines.

*** DOES NOT fit Industrial Size shafts bigger than 9.5mm Diameter.